Procedure pl_time.qcl displays a Ginga TIME series.

A Ginga data CUBE or TIME series.

Procedure pl_time.qcl requires a variable number of input parameters. The QX parameter system is used to read these parameters.

1. The graphics device.
2. The number of windows required to display light curves. For MPC1 mode data, two windows are required to display both top- and mid-layers.
3. The name of the input data CUBE or TIME series.
4. Detector channel to display.
5. Spectral channel to display.
6. Detailed labels to be use on the plot (Y/N; the default is N).
7. Start and stop time of the data to be used in the plot.
8. Minimum and maximum Y-axis values to be displayed.

Note that:

1. The Y- scaling parameters apply to all panels in multi-panel plots.
2. Parameter 4. selects how the input data is combined for the output plot, i.e. if there are N detector combinations in the file to be displayed they are combined (summed) into groups of N/par at a time. Example: If there are 8 detectors and parameter 4 is 2, then a two panel plot is produced with detectors 1-4 on the first panel and detectors 5-8 on the second panel.